Enviro-Safe™ Refrigerant 22a (ES-22a)

HomeRefrigerants.com

 
Enviro-Safe™ 22a, like all of our refrigerants, is environmentally friendly (non-ozone-depleting) and non-global warming.Enviro-Safe™ 22a is very efficient and provides lower head pressures resulting in less wear and tear on your unit. Each pound of ES-22a is equivalent to 2.5 lbs of R-22.
 
If you are charging with gauges, charge to ambient minus 10 to as high as ambient. In other words, if it is 90F outside, charge the lowside to 80psi, etc. however, even it is over 100F do not continue to extrapolate. This is for normal summer-time temps of 70F and up. (If it is 70F or lower, charge to ambient minus 5. So, if it is 70F charge low-side to 65psi.)
 
Never charge the lowside over 90psi regardless of temp. If it is over 100F outside you will get colder vent air at 85psi on the low-side. (If you know what the low-side pressure should be when charged with regular R-22 you can charge ES-22a to that same low-side pressure. If you do not, the "ambient minus 10" discussed above works well...in all cases invert cans or cylinders so that ES-22a charges into the low-side as a liquid )
 
EPA notice:  * In the USA only, Enviro-Safe 22a is sold as a second generation replacement for R407c, R404a, and MO99. Outside the US, Enviro-Safe 22a is sold as an R22 replacement. Not for use in R410a Systems. 
 
Some of our customers have had visits from their local power companies wondering why their energy usage has suddenly dropped! For those of you with heat pumps, ES-22a works extremely well in them, so you can heat with it also! 
 
 Enviro-Safe™ 22a Refrigerant is a non-ozone depleting product and is completely safe for the environment.

The products we market have been perfected over the years, and are now highly refined and computer blended to within 1/4 of 1% by a major American petrochemical supplier. This means our products are consistent each and every time our customers use them!

Enviro-Safe carries a guarantee that Enviro-Safe™ Refrigerants will not harm air conditioning, compressors or other related mechanical equipment when used in accordance with Enviro-Safe directions.

In most cases, Enviro-Safe™ 22a Refrigerant is capable of delivering energy savings and will result in a considerable reduction in operating costs!

There are many advantages to using Enviro-Safe™ 22a Refrigerant. It allows your system to operate with less head pressure and is extremely efficient! We have recorded energy savings of up to 40% over R22.

Enviro-Safe™ 22a Refrigerant also meets international standards such as—ISO 5149, BS 4434-1995, AS/NZS 1677 and ASHRAE 5149.
 
Reasons people buy ES-22a and tell their friends:  
 
The air is much, much colder from the ducts. (shorter run-times...and when it is running, the ES-22a is so much easier to compress, the load on the compressor is greatly diminished resulting in significant amperage drop
 
Electricity consumption drops dramatically (25-40%) by simply switching from R-22 to this refrigerant!   (No changes whatsoever to the system. It works fine right on top of R-22 but is much colder and more energy efficient alone)
Picture of ES-22a cans, Proseal XL and long chargehose with gauge

This product is available in 30lb equivalent cylinder ($180.00)  and 50lb equivalent cylinder ($220.00)  and small cans below! Click on prices or appropriate pound equivalents above to purchase.( Free Shipping On All Cylinders )

Standard R-12/R-22 gauge-sets/hoses fit the above cylinders.  

An adult signature is required to receive cylinders so please use a shipping address where someone can sign for it, like your workplace address for example.

New extra long chargehose (picture) w/inline gauge for use with cylinders! $30.00

New extra long chargehose (picture) w/inline gauge for use with smaller cans! $30.00

Case of 12-8oz. ES-22a cans ($ 88.00)  (free shipping) (equals 15 lbs R-22)
 
6-pack of  ES-22a cans ($ 50.00)    ($7.00 shipping) ( equals 7.5 lbs of R-22)
 
Single cans of standard Pro-seal for leaks ($15.00 per can)  ($7.00 shipping)
use with Pro-Dry offered below.
 
New heavy-duty stopleak product below: XL-4 !!!
Picture of  Proseal XL-4 
 
Note: Please use the XL-4 with Pro-Dry offered below. This product is so effective at sealing leaks you want to be 100% sure that there is no air or moisture in the system first. Pro-Dry gives you that assurance.

Proseal XL-4 for stubborn leaks in home systems ($19.00 per can)

Pro-Dry to insure system is dry  ($15.00 per can)

Case (12-cans) Proseal XL-4 ($165.00 per case)

Home A/C "Quick-charge Kit"($50.00)  Four (4) cans of ES-22a and an R-22 charging hose. (equivalent to 5 lbs. of R-22 !) ($7.00 shipping) Note: If you want this kit to come with the "extra long hose with the gauge" simply say so in the message section when you order and we will include it for only $12.00 more. It is pictured here and helps you get the refrigerant charge as accurate as possible.

Charge-hose/cantap for your R-22 system and these cans ($19.95)

(Picture of this ES-22a chargehose/cantap)

Note: If you use R-12/R-22 manifold gauges, our Universal sidetap ($17.00)  will work with these ES-22a 8 oz. cans. The 30 and 50 lb. equivalent cylinders of ES-22a come with R-12/R-22 fittings pre-installed for easy connection to your standard R-12/R-22 gauges.

Picture of universal sidetap

New extra long chargehose (picture) w/inline gauge for use with cylinders! $30.00

New extra long chargehose (picture) w/inline gauge for use with smaller cans! $30.00

1 lb. of ES-22a is equal to 2.5 lbs of R-22

(No license required for purchase)

$7.00 shipping for individual items (cans and/or hoses etc.) if ordered alone.In no case will you be charged more than $12.00 in total shipping fees for any combination of items above.

Try our ES-12a for your Auto, RV, Marine, and refrigeration equipment

click for extreme pic.
 
 
Use Ambient minus 10 up to 85psi. regardless of the temp do not charge over 90psi. 85 psi is optimum if the temp is over 100F. If it is 70F or lower, charge to ambient minus 5. So, if it is 70F charge low-side to 65psi.