Firepower FP-1O Lubricant
Elite
TM is a
petrochemical product specifically designed and formulated with the serious
shootist, sportsman and professional armorer in mind. No other product can match
the performance and unique qualities of FP-10.
Extensive
testing and evaluation has proven that
FP-10 improves bore accuracies due
to its unique metal-treating capabilities and reduced coefficients of friction
between the bullet surface and rifling lands of the barrel. This results in more
linear bullet velocities and a more even distribution of chamber pressure
(c.u.p.) during ignition and bullet flight within the bore. Secondly, the
reduced coefficients of friction mean reduced friction-related heat and wear,
not only within the bore, but on all moving metal parts of the
weapon.
FP-10
contains Muscle MT-10 Metal Treatment TM to smooth and
seal metal surfaces with no danger of build up or changes in tolerance.
FP-10 causes an
electrochemical reaction to take place upon the metal surfaces developing a
cation* exchange of positive and negative ions. Metals are made up of metallic
carbides (high surface areas of positive charge) and base metals (low surface
areas of negative charge). When FP-10 is applied to a
system, such as the moving parts or slide of an auto, there is a cation exchange
of ions which fills up the low surface areas of the metal and alters
the surface to
create a totally positive state of polarity. When the metal surface polarity
becomes uniform in charge, there is a reduction in friction due to the Faraday
reaction of like charges. Likewise, in the case of FP-10, a similar reaction takes place within the bore as the treated static
metals of the rifled lands assist in ballistic movement of the bullet due to
reduced frictional coefficients. This causes a more even build of pressure
during ignition due to the fact that the bullet sees less frictional resistance
from the lands, causing an improved accuracy expressed in better average
velocities, extreme spreads, standard deviations and bullet
groupings.
Keeps
Weapons Functional in Adverse Conditions
Dramatically Improves
Lubrication**
Cleans Firearm & Removes
Leading
Removes Burnt Powder &
Dirt
Shields Against
Corrosion
Penetrates Remote Areas
Stops & Inhibits Rust
Wear Tests were performed by an Internationally recognized ASTM Research Facility in San Antonio, Texas, between Breakfree CLP® and Firepower FP-10 Lubricant Elite™.
The test results show two categories of data. One being the load wear index, or scar on the bearing after the test reaches its maximum lubricity or seizure point. The second being the seizure point itself. As can be seen from the attached data, the load wear index of Break Free indicates 61.83 and a weld point (bearing seizure) of 315 kg. When FP-10 was run under the identical conditions, it did not seize, even at the highest load point possible on the machine (720 kg).
The results obtained from wear tests performed according to ASTM D 2783 are as follows:
Oil Code ____________Load Wear Index _______Weld Point. (kg)
Break Free CLP __________61.83 _________________315
Fire Power FP-10 __________N/A _____________No Seize at 720
Firepower FP-10 did not seize at the highest load available in this test procedure.
*Breakfree CLP is a
registered trademark of Armor Holdings, Inc